Error Message: 'Something's wrong with Furbo'

This is the error message if there's a connection issue between the Furbo Dog Camera and your mobile phone.

1. Logout of your Furbo app and close the app completely from your phone's background.
2. Restart the router (Unplug your router for 30 seconds, then, plug it back in). If possible, the Furbo's placement should be at least 5 feet away from the router.
3. Unplug and replug the Furbo after 30 seconds, wait for the light to turn blinking yellow, then, re-setup. If the light will not turn green, proceed to step 4.
4. If the issue persists after steps 2 and 3, do a hard reset on your Furbo. Press and hold the reset button for about 5-10 seconds until the light starts blinking yellow, then, try to set up again.
   
   

If you continue to have issues setting up your Furbo, please contact our support team.

Live Chat

Having other setup issues with a different error message?
Check the following support pages below: 

Error Message: 'Wrong Router Password' 

Can't find my Wi-Fi network in the App

Error Message: 'Something's wrong with your internet'

Error Message: 'Can't connect to your Furbo'