Can't find my Wi-Fi network in the App

If you cannot find your WiFi network on the WiFi list, it might be because of the following reasons:

If you encounter an issue during the initial setup and your Furbo is on Green Light:

1. Your WiFi is hidden.

Please make sure your WiFi is not a hidden network. You can check your WiFi with another smartphone, tablet, or laptop/computer.

If you are using a hidden WiFi network, please click "Other network" in the "Set up Furbo's WiFi" page and manually input the name and the password. 

2. The WiFi signal is too weak.

The WiFi list is sorted by signal strength. Please make sure that the distance between the WiFi router and your Furbo is not too far (within 5 feet). Please note that Furbo's WiFi antenna is on its right side. To get a better connection, it will be best if your Furbo is on the left or front side of your router with no physical barrier causing interference, such as concrete walls.

Please try to move the Furbo closer to your router, then go through the setup process again. 

3. You are using a 5GHz WiFi frequency router.

Furbo cannot connect to  5GHz WiFi frequency routers; it only works with 2.4GHz frequency routers. 

Most WiFi APs that provide 5GHz channels will also provide 2.4GHz channels at the same time - dual-band. This means the 2.4GHz and 5GHz WiFi are both available with different WiFi names. Please use the 2.4GHz channel Wi-Fi to set up Furbo.

If you are having trouble connecting, it will be best to turn off the 5GHz signal temporarily while setting up your Furbo. To know whether your router offers 2.4GHz or 5GHz, please contact your internet service provider.

If you encounter an issue during reset WiFi via App and Furbo is Purple Light:

1. Please try to Replug Furbo to see if Furbo can turn to Purple then Yellow light,

2. If not, please try to remove Furbo from your account. Go to  "Remove Furbo from your account" for more info.

Tap the button below to Remove Furbo from your account.

Account

See the guide below to remove Furbo from your account:
 

3. After removing Furbo from your account, perform a hard reset on your Furbo to Greenlight status to set up again, go to "Hard reset your Furbo '' for more info.

4. Try a re-setup by logging in to your Furbo account.

5. If the steps above did not work, please replug yourFurbo, then try the setup again via the Furbo app.

If you still encounter the same problem, please contact us.

Having other setup issues with a different error message?
Check the following support pages below: 

Error Message: 'Wrong Router Password' 

Error Message: 'Something's wrong with your internet'

Error Message: 'Something's wrong with Furbo'

Error Message: 'Can't connect to your Furbo'