Learn what each status light color means on your Furbo Dog Camera and understand your camera's connection and operating status.
Understanding Your Furbo Dog Camera's Status Light
The status light on the Furbo Dog Camera (original model) is located at the base of the camera. Its color changes depending on the camera's connection and operating status.
Applicable Device: Furbo Dog Camera (Original Model)
Important: The status light colors and meanings in this article apply specifically to the original Furbo Dog Camera. Other Furbo models, including the Furbo 360° Dog Camera and Furbo Mini, may have different status light colors and meanings.
What Do the Furbo Dog Camera Status Light Colors Mean?
The following status light colors indicate different conditions on the original Furbo Dog Camera.
White Light – Powered On, Not Set Up
A white status light on the Furbo Dog Camera means the camera is plugged into a power source and receiving power but has not yet been set up.
Green Light – Setup Mode
A green status light on the Furbo Dog Camera means the camera is in setup mode and ready for the setup process.
Purple Light – Wi-Fi Disconnected
A purple status light on the Furbo Dog Camera means the camera is not connected to a Wi-Fi network.
Yellow Light – Connected and in Standby Mode
A yellow status light on the Furbo Dog Camera means the camera is connected to a Wi-Fi network and is currently in standby mode.
Blue Light – Live Streaming
A blue status light on the Furbo Dog Camera means the camera is currently being used for live streaming.
What Does the Red Light Near the Camera Lens Mean?
The red light near the lens of the Furbo Dog Camera is different from the status light located at the base of the camera.
For more information about this light, see the Night Vision article.
Fun Fact
Dogs can distinguish yellow and blue, which means your dog may be able to recognize whether you are watching through the Furbo Dog Camera.
Learn more in The World Through Your Dog's Eyes .
Related Troubleshooting
If your Furbo Dog Camera's status light is not turning green during setup, refer to the following article:
Setup Troubleshooting: