If you cannot find your WiFi network on the WiFi list, it might be because of the following reasons:
- Your WiFi is hidden.
Please make sure your WiFi is not a hidden network. You can check your WiFi with another smartphone, tablet, or laptop/computer.
If you are using a hidden WiFi network, please click "Other network" in the "Set up Furbo 360° Cat Camera's WiFi" page and manually input the name and the password.
- The WiFi signal is too weak.
If you are not finding your WiFi network, it’s possible that the WiFi signal is too weak. Please move the Furbo within 5 feet of your router during setup to see if you can establish a stronger connection to resolve the issue. Once connection is established, you may be able to relocate your Furbo to your desired location.
Please note that Furbo's WiFi antenna is on its right side. To get a better connection, it will be best if your Furbo is on the left or front side of your router with no physical barrier causing interference, such as concrete walls.
- You are using a 5GHz WiFi frequency router.
Furbo 360° Cat Camera cannot connect to 5GHz WiFi frequency routers; it only works with 2.4GHz frequency routers.
Most WiFi APs that provide 5GHz channels will also provide 2.4GHz channels at the same time - dual-band. This means the 2.4GHz and 5GHz WiFi are both available with different WiFi names. Please use the 2.4GHz channel Wi-Fi to set up Furbo 360° Cat Camera.
If you are having trouble connecting, it will be best to turn off the 5GHz signal temporarily while setting up your Furbo 360° Cat Camera. To know whether your router offers 2.4GHz or 5GHz, please contact your internet service provider.
If you still encounter the same problem, please contact us.